Easy KitchenAid Microwave Display Board Replacement Guide

Is your KitchenAid microwave display board looking old? A faulty display board can be annoying. It can cause issues like uneven cooking. The good news is that KitchenAid microwave display board replacement is not too hard. This guide will help you fix it yourself, step by step.

Steps for replacing the display board in a KitchenAid microwave

Before you start working on your KitchenAid microwave, make sure you get the right tools. You will probably need a Phillips head screwdriver, a flat-head screwdriver, and needle-nose pliers. It’s a good idea to have a small container to keep screws and small parts while you take things apart.

Once your tools are ready, check that you have all the materials you need. Most importantly, make sure to get the new display board. When you order it, double-check that it works with your specific KitchenAid microwave model to avoid any problems.

Identifying the Correct Display Board for Your Model

Finding the model number of your KitchenAid microwave is very important. It helps you get the right display board. You can usually find this number on a sticker. The sticker is either inside the door or on the back of the microwave.

After you get the model number, look online or go to an appliance parts store to find the display board you need.

Make sure to check the part numbers of the old display board and the new one to ensure they match. If you are unsure, take a photo of your old display board and the model number sticker. You can show it to a store worker for extra help.

Safety First: Unplugging and Discharging the Microwave

Before you start taking apart your KitchenAid microwave, make sure to unplug it first. This helps to prevent electrical shock. However, just unplugging it may not be enough. Microwaves have capacitors that can keep electrical energy even when they are not plugged in.

To safely release the stored energy in the capacitor, find the high-voltage capacitor. It looks like a big cylinder. Use an insulated screwdriver or pliers with insulated handles. Touch the metal terminal of the capacitor with the metal part of the screwdriver while holding the insulated handle. Do this two or three times to make sure the capacitor has no energy left.

Removing the Old Display Board: Step-by-Step Instructions

1. Make sure the microwave is unplugged and all electric power is off. Then, carefully take off the outer shell of the microwave. You usually need to unscrew some screws from the back and sides.
2. After removing the shell, find the display board. It is mostly clipped or screwed into the control panel.
3. Slowly disconnect the wires attached to the old display board. Remember where each wire goes. This will help you when you install the new board easily.

Installing the New Display Board: Tips and Tricks

When you take off the old display board, place the new one in the same spot. Use the screws or clips from the old board to hold it in place. Next, connect the wiring harnesses. Make sure each wire goes into its correct slot.

Take your time. Be careful not to bend any pins. Check that all connections are tight and lined up right. Do not force any connections, as this may hurt the board or the wiring.

Powering On and Testing the New Display Board

With the new display board installed, it’s time for a test run. Carefully reassemble the microwave’s outer casing. Plug the appliance back into the outlet and turn it on.

Here’s a helpful way to check if the new display board is working correctly:

Contact Star KitchenAid Repair for Professional Help

Replacing a KitchenAid microwave display board can be an easy DIY task. However, some situations might need help from a professional. If you are not sure about working with appliances that use electricity, it is better to get help from skilled technicians if you run into any issues.

Star KitchenAid Repair focuses on all KitchenAid services. We promise excellent service and real parts for your appliances. Don’t wait to call us for expert help. Whether KitchenAid microwave repairs or others like KitchenAid refrigerator repairs, we got you covered.

Conclusion

If you want to perform KitchenAid microwave display board replacement by yourself, we have a simple guide for you. It includes the tools you need and safety steps to keep in mind for a successful DIY job. Make sure to unplug the microwave before you start. Then, follow our easy instructions for replacing the display board. If you run into any problems or would rather get help, feel free to reach out to Star KitchenAid Repair for expert support. For more helpful tips, visit our blog on Quick Fixes for Kitchen Aid Microwave Not Working. Happy repairing!

Frequently Asked Questions

Can I replace the display board myself or should I call a professional?

Replacing the display board in a KitchenAid microwave is something you can do yourself. However, it involves working with electrical parts and requires some skills. If you feel uncertain, it’s better to reach out to a qualified technician. They can ensure a safe and proper installation.

What is the average cost of a KitchenAid microwave display board?

The price of a KitchenAid microwave display board can change based on the model and store where you buy it. Generally, you should expect to spend between $50 and $150 for a new display board.

How long does it take to replace a microwave display board?

You can replace the KitchenAid microwave display board in about an hour if you have the right tools and some experience. If you are new to fixing appliances, it might take you a bit longer, so plan for that extra time.